Comments on Meyer Fuel Cell Using a Catalyst

Formation and Use of HH+.  For use in a Meyer fuel cell, a possible substitute, HH+, for an unknown catalyst, HH+, might be produced using a weak acid in water and the Bessler principle.  Each H+ within the substitute catalyst might come from the acid.  The Bessler principle would cause an H+ to produce a horizontal nuclear-magnetic-dipole of NS.  A pair of such H+ would magnetically join together to form the horizontal HH++ with horizontal nuclear-magnetic-dipoles (NS NS).  An extra electron could easily turn HH++ into HH+.  An extra electron could be attached to the oxygen atom in a water molecule.  The oxygen nucleus is induced by the Bessler principle to become a horizontal nuclear-magnetic-dipole, NS.  Then the oxygen in a water molecule (H2O or HOH) is held in place by bounding it on opposite sides horizontally with an HH+ on each side.  With the oxygen at the center, there could be formed a horizontal string of five horizontal nuclear magnetic dipoles (NS NS NS NS NS) from the (HH+ O- HH+) so that the center water molecule may be rotated rapidly about the horizontal axis by the Bessler principle to rotationally rip its hydrogens away by gravity.  Once the hydrogens are ripped away, the negative oxygen might be pulled away by electric fields.  After the water is disassociated, the pair of HH+ would be available for rotationally ripping apart other water molecules.  The HH+ should serve as a catalyst, since it is reused.

Avoid Stagnation.  As I wrote in my free book MSEHNS and as was advocated by Meyer in his patents, there should be short pulses of increasing slight voltages within the short pulses, with no voltages outside the short pulses.  That should help keep the water from stagnating into clumping strings of horizontal nuclear-magnetic-dipoles.  The short-time pulses of slight voltage (whether produced by horizontal or vertical electric fields) could kick a polar water molecule into an initial rotation about a horizontal axis (HH+ O- HH+) perpendicular to the electric field.  My book (MSEHNS) and the Meyer patents referred to horizontal electric fields but vertical electric fields as depicted in the video (https://www.youtube.com/watch?v=IkO7Qu-ciwI THE FORBIDDEN WATER ENGINE EXISTS! Infinite Energy Generator) should also work just as well.  The formed bubbles would also help keep the water from stagnating.  We would not want steady electrical fields, whether horizontal or vertical, since that could be stagnating.  Stagnant water would tend to prohibit rotations of water molecules about horizontal axes, which would limit the use of the Bessler principle to rotationally rip apart such molecules.  We must keep the water from being stagnant and forming water clusters of horizontal strings of horizontal nuclear-magnetic-dipoles NS NS NS NS NS NS NS NS NS NS NS NS NS NS NS, etc. associated with atoms H O H H O H H O H H O H H O H, etc.  I also suggested in my book, MSEHNS, that a horizontal double-helix vortex-tube for the input water supply/resupply for the Meyer fuel cell could help break up water clusters.  An electron attached to the oxygen should allow that prior middle of the detached water molecule to be detached from the middle of the horizontal line of (HH+ O- HH+) corresponding to five nuclear-magnetic-dipoles (NS NS NS NS NS) so it not be stagnant.

Book Suggestion.  I suggest that you read my most recent (3 June 2025) free book, Many Scientific Enigmas Have New Solutions (MSEHNS).  It or MSEHNS is available as a 200 page pdf file from my sites https://gravityunveiled.home.blog/ or https://gravity-wheel.neocities.org/.  The book didn’t contain information about the HH+ spoken of in the above video about an attempt to produce the Meyer fuel cell.  I made my own best guesses about what was going on with respect to the unknown catalyst HH+.

Free Energy Devices.  Here are some comments that may expand the thinking of some people regarding free energy devices.  We should not be critical of the Meyer fuel cells, when plenty of energy/power is being created in the sun in the form of gravity.  Energy in the form of light can be produced on the sun from some of the energetic gravity.  The energy produced could be called free energy, if you count the energy from gravity, as being free.  Each smallest portion of gravity is in the form of a two-part graviton.  Upon being absorbed, each of the two parts of a graviton attractively pull downward using discrete impulses on its own smallest portion of charged matter.  The sun is effectively a perpetual energy-productive device or a free energy device.

Lie of Sun’s Energy from Nuclear Fusion.  There is a big lie being propagated that the sun gets its energy from nuclear fusion reactions deep down within the sun.  Any energy produced deep within the sun should reasonably result in colder temperatures, when there is greater exposure to the ultra-cold background temperature of space, which should occur as elevation on the sun increases.  The lie is thus easily manifest by the observations that the temperatures seen coming from the sun actually increase as elevation on the sun increases.  That is completely contrary to the supposed idea that the sun gets its energy from nuclear reactions deep down within the sun.  Sunspots are deeper, darker, and cooler than the approximate 6000 degrees Kelvin photosphere.  The edges of the sun’s atmosphere emit radiations 1,000,000 degrees Kelvin or 10,000,000 degrees Kelvin at the furthest edges of the solar atmosphere.  The sun doesn’t get its energy from nuclear fusion reactions deep down within it.  See pp. 22, 25-26, 121-122, and 125-126 of MSEHNS.

Sun’s Energy from Bessler Principle.  The sun actually gets its energy from the Bessler principle.  The Bessler principle says that a wheel rotating about a horizontal axis (relative to the gravitons) obtains extra rotational kinetic energy from the two separate discrete pull-down impulses of each discrete graviton.  For normal wheels, we usually don’t see the extra rotational kinetic energy because friction usually removes it and even more energy.  See some details on pp. 31-34 in MSEHNS.  The basic idea of the Bessler principle is that the discrete graviton is composed as two discrete electric fields coming from oppositely charged most-fundamental spirit-matter.  A nucleus is composed of a large number of most-fundamental spirit-matter-charged-particles.  The spirit-matter-charged-particles are extremely fine, since they form the basis of both matter and antimatter.  For a nucleus rotating about a horizontal axis, there is usually a lower elevation attractive pull-down of a most-fundamental spirit-matter-charge, then followed by a higher elevation attractive pull-down of an opposite charge of most-fundamental spirit-matter.  There is a slight time delay between the lower elevation pull-down impulse and the higher elevation pull-down impulse, which allows the spirit-charge particle-pair to acquire extra rotational kinetic energy about their center of mass.  The more rapid the initial angular speed of a pair about a horizontal axis about its center of mass means that generally more rotational kinetic energy is acquired about the pair’s center of mass.  That is how the Bessler principle acquires extra rotational kinetic energy.  Again for normal wheels with friction, more rotational kinetic energy is lost to friction than is acquired by the Bessler principle so the wheel slows down.  For some cases in space, wheels the size of nuclei have very low friction so they may increase in angular speed by the Bessler principle, if they were initially rotating about a horizontal axis.  The sunspots have strong vertical magnetic fields, which cause nuclei to only rotate about vertical axes and not rotate about horizontal axes, thus they can’t acquire very little extra rotational kinetic energy by the Bessler principle.  At the far edges of the solar atmosphere, nuclei can rotate about horizontal axes with essentially no friction, thus two pull-down impulses with a slight pause between them often produce greater rotational kinetic energy.  The furthest edges of the solar atmosphere allow the least rotational interference or friction.  There a nucleus is able to rotate the most rapidly about a horizontal axis.  A nucleus rotating about a horizontal axis increases in rotational kinetic energy, until an attracted electron comes along and is struck by the rotating nucleus producing a mysterious large-energy photon associated with the observed high temperature radiation.  The temperatures of radiation from the sun are well explained by the Bessler principle.  Since the light from the sun is not dependent on nuclear fuel, the sun’s light can be produced for an extremely long time or much longer than according to prior estimates based solely on consumption of nuclear fuel producing energy from the sun.  See pp. 80-81, 86-87, and 132-134 of MSEHNS.

Bessler Principle Evidence.  The Bessler principle can be inferred from many phenomena, observations, devices, and experiments.  See such in my book, MSEHNS.  In MSEHNS, I explain or reference my solutions/explanations of 89 different types of scientific enigmas.  I used simple reasonable principles to do the explanations.  Without the simple reasonable principles, we wouldn’t have solutions/explanations for the 89 enigmas, pp. 162-163 of MSEHNS.  Most of those solutions/explanations came from on the Bessler principle.  The Bessler principle provided the understanding for solving many other enigmas beyond the more obvious Bessler principle puzzles.  I have long suggested a couple of especially convincing/proving experiments regarding the Bessler principle:

(1) Rotate a rotationally new cylinder about its axis of rotational symmetry in space near the plane of the centers of the earth, the moon, and the sun with the cylinder’s rotational axis also corresponding to the cylinder’s axis of rotational symmetry being perpendicular to the plane to see if the angular speed increases, pp. 85-86, 150-152, and 121-123 of MSEHNS.

(2) Replicate a small simplified version of the 1968 McKinley low-friction demonstration to see if the angular speed increases, pp. 26-27 of MSEHNS, or see pp. 142-146 of GWU (my free pdf book, Gravity-Wheel Unveiled, Alden Park, 18 Mar 2019, 712 pages available at my blog site, https://gravityunveiled.home.blog/) until there is equilibrium with forces slowing down the wheel.  Lead at liquid helium temperatures excludes all magnetic fields so an extremely low-friction rotational-bearing (with magnets covering its axles) can be created.

I am not aware of anyone doing either of these experiments, despite the importance of such experiments.

Energy Productive Devices.  I have contributed to explanations of how various energy productive devices can extract energy from gravity by means of the Bessler principle.

(1) I explained how the Orffyrean roller bearing may be constructed so that with a pair of such bearings we can have modern versions of the Bessler wheels, pp. 102-111 of MSEHNS.

(2) I provided information left out of the Papp patents, which should allow the Papp engines to work, pp. 62-79 of MSEHNS.

(3) I explained how the GEET reactors work (if they have plenty of cool water available for continual use in rotationally ripping apart cool water vapor), pp. 36-54 of MSEHNS.  Normal fuels should be used to initially get them to running, when oxygen is available for combustion.

(4) I explained how the fuel cells invented by Stanley Meyer used short pulses of increasing horizontal electric fields to create rotational resonances about horizontal axes to allow gravity to rotationally-rip-apart the electrically polar water molecules, using very little input energy (except for rotational kinetic energy supplied by two-part gravitons), pp. 170-175 of MSEHNS.  I didn’t understand about the use of the catalyst, HH+, until I heard about it in the video.  From there I figured out how HH+ might be produced and be used.

(5) I explained how one can produce high temperature artificial suns, pp. 135-139, to produce much steady heat.

(6) I explained how Ed Leedskalnin built his energy-productive Sweet Sixteen family of cylinders, pp. 87-91 of MSEHNS, which he used to build his Rock Gate Park (now called Coral Castle).

(7) I explained how the Yildiz magnet motors (which are existing perpetual motion devices powered by energetic gravity) continually produce power, p. 35 of MSEHNS.

(8) I explained how the sun produces its radiant energy (as an existing perpetual motion device powered by energetic gravity) continually producing power.

For more details on these and many other devices and phenomena, see the respective Index and Contents for MSEHNS and GWU.

Basic Physics.  Let us take a peek at some the basic physics.  Though many rejected his 1954 comments to his good friend Besso, Einstein was prepared to give up on contiguous structures, as the basis of physics.  I think that was likely after he heard the anomalous results in Allais’ observations during the total solar eclipse of 30 June 1954 (possibly suggesting that gravity coming from the sun can be absorbed within the moon).  He was prepared to give up his theories of relativity.  Why might that be?  If gravity from the sun could be absorbed within the moon, then the curvature of his spacetime would somehow be absorbed during a total solar eclipse.  I suppose he considered that spacetime structure/geometry/curvature could not be absorbed or temporarily shadowed by an eclipse.  I suppose he figured that his theory of gravity might be completely wrong, if gravity could be absorbed by matter.  There is modern evidence of gravity being absorbed in matter.  A discrete graviton could be absorbed by matter providing attractive impulses during absorption.  How could one formulate a discrete theory of gravity?  I attempted a discrete theory of everything (in my free book, GWU) based upon two types of finest most-fundamental charged-matter and two types of discrete electric fields either coming from or being absorbed by the matter.  That could mostly be the basic physics in a nutshell with all forces built up from that framework.  Still, kinetic energy would never be conserved, when a discrete electric field is absorbed by a smallest bit of finest most-fundamental charged-matter (or spirit-matter).  All forces are inherently energy non-conservative.  On a gross scale of matter and electric fields, that might allow for gross conservation of energy (as many people argue for) but there is a major energy exception regarding gravity being absorbed in rotating objects.  A graviton is composed of two discrete electric fields coming from oppositely charged spirit-matter.  A graviton is quite rare when it comes from small portions of matter, since it depends upon five formation constraint conditions (two extremely precise angular constraints, two spatial offset constraints, and a timing constraint).  The graviton travels in a straight line until five absorption constraint conditions are attained.  Each of the two discrete electric fields in a graviton being absorbed has two spatial offset constraints (with respect to its intended absorbing spirit-matter-charge) and there is a timing offset constraint, according to the absorptions occurring when the two spirit-matter charges are actually present.  Gravity is attractive, since each discrete electric field is absorbed by a spirit charge opposite to the one which gave it its origin.  The 10 constraints explain why gravity is so extremely weak relative to the electric forces underlying gravity.  An electric force only has two spatial-offset absorption constraint conditions.  Those 10 curious constraints (and especially the last five) provide an important Bessler principle of every wheel rotating about a horizontal axis acquiring more rotational kinetic energy about a horizontal axis than it initially had.  The effect is increased by having higher initial angular speed.  Normally extra energy is not readily observed because of nearly ubiquitous friction, nevertheless there is more energy if carefully accounted.  Typically for moving/rotating objects, the higher elevation spirit-matter-charge slightly moves between the times in which the lower elevation spirit-matter-charge suddenly absorbs a discrete electric field of a graviton and the higher elevation spirit-matter-charge suddenly absorbs the other discrete electric field of the graviton.  The situation is rotational-kinetic-energy non-conservative for matter rotating about a horizontal axis.  When the Bessler principle is used, it almost always increases energy.  The graviton including its absorption is a quantum process, though operating at a much finer scale.

Infinities Await.  We live in an infinite universe with space increasing and matter increasing, as we can see in MSEHNS or GWU.  I explain how such things are possible.  In our infinite universe, we never need to worry about having insufficient new matter, new energy, and new space.  We never need to worry about running out of matter, energy, and space.  In eternity, any initial portion of matter will be ancestral matter to an infinite amount of descendant matter.  As a graviton pulls down on light, that leaves behind two tiny opposite charges of new-spirit-matter in their own new space.  Enough concentrations of spirit-matter condense into hydrogen and not into anti-hydrogen by the spirit-matter being obedient to God.  That is why there is relatively so little antimatter in our infinite universe.  20251028AEP

MSEHNS Explains Many Energy Puzzles

On 3 June 2025, I published my free book, Many Scientific Enigmas Have New Solutions or MSEHNS. It is available as a 200 page pdf file from https://gravityunveiled.home.blog/ or https://gravity-wheel.neocities.org/. In #MSEHNS, I explain or reference my solutions/explanations to 89 different types of scientific enigmas. I used simple reasonable principles to do the explanations. Without the simple reasonable principles, we wouldn’t have solutions/explanations to the 89 enigmas.

There has been a great energy cover-up lasting a very long time, mainly with respect to enigmas and consequently with respect to solutions/explanations. We have been making many decisions using false information over a very long time.

I am encouraging many experiments to be done and various devices to be built, which will help bring forth the truth.

The Bessler principle is a hidden, self-suppressed friction-masked fundamental physical principle. It basically says that every wheel rotating about a horizontal axis acquires extra energy from gravity. The faster the rotation the more rotational kinetic energy is produced. The slower the angular speed the less extra energy is produced. We usually don’t see the extra energy because friction usually removes it and even more. Nonetheless the extra energy produced can be manifest in many situations. The principle coming to light can resolve much confusion. The principle has many implications with respect to how energy has been produced and will be produced. Energy is very important with respect to a multitude of things. The suppression spills over to all sorts of areas including energy production/devices, economics, and education.

Consider our sun, which is the largest source of power in this solar system. How do you think the sun produces its energy/power? Many people say that the sun gets its extra energy from nuclear fusion reactions deep down inside the sun. If that were correct, then the temperatures would be highest deep down inside the sun and the temperatures would be smaller with greater elevation on the sun because then there is greater exposure to the ultra-cold background temperature of space. What is measured on the sun is exactly the opposite. Sunspots are windows through the sun’s hot 6000 degrees Kelvin photosphere and #Sunspots always show cooler, darker material deeper down into the sun. The high elevations of the sun’s atmosphere can yield temperatures of 1,000,000 deg K or even 10,000,000 deg K at the furthest edges of the solar atmosphere. There are not too many of such high energy photons (energetic light quanta) so they need to be observed during total solar eclipes so as not to be overwhelmed by the many lower energy photons coming from the photosphere. The sun is an example of a perpetual motion device powered by gravity, according to the Bessler principle. Electrons attracted to the positively charged rotating nuclei are struck and give off radiation. We have been lied to (inadvertently) for a long time about the source of the sun’s energy. #SunEnergy

The magnetic motors of Yildiz are more directly-useful examples of gravity powered perpetual motion devices, p. 35. #YildizMagneticMotors

With plenty of cool water the GEET reactors or #GEET_reactors are nearly #Green_24_7 devices. I explained why and how they work, pp. 36-54.

In 2021, CSX got 533 miles per gallon (mpg) for transporting a ton of freight. Such a #RailroadEfficiency can be attained because of massive #RailroadWheels rotating about horizontal axes, pp. 97-101.

Wind frictional forces are according to the square of speed but car mpg doesn’t decrease according the 1/(square of speed). It decreases but not as much as it should because of wind friction. Something is keeping up mpg from going down so rapidly. It is the Bessler principle. Think of wheels and axles rotating about horizontal axes, pp. 96-97.

I explained why the water-filled #DoubleHelixVortexTubes work, pp. 167-169.

I explained why and how the air driven Ranque-Hilsch vortex tubes can produce #VortexTubeTemperatures when horizontal and little difference when such tubes are vertical, pp. 91-96.

I explained how to reinvent the #PappEngines and how/why they should work, pp. 61-79.

I explained how to reinvent the #MeyerFuelCells and how/why they should work. Meyer used short pulses of increasing horizontal electric fields to exploit rotational resonances of the electrically polar water molecule, to rotationally rip apart the water molecule by the Bessler principle, pp. 170-175.

I explained how to reinvent Edward Leedskalnin’s #Sweet16Cylinders, according to his coded 1936 book, and how/why they should work, pp. 87-91. I used the Bessler principle as the decoding key for decoding his book.

I explained how the ancient #YinYangCylinders worked according to the most ancient available version of the yin-yang symbol, pp. 124-127, 152-153.
 
I explained how one can reinvent Johann Ernst Elias Bessler’s #OrffyreanRollerBearings according to his many coded bearing specifications of his 1716/1717 coded book, Apologi’sche Poёsie und Poetische Apologie Von seinem MOBILE PER SE und PERPETUUM MOBILE. I used the Bessler principle as the decoding key for decoding his book. Orffyreus was a pseudonym for Bessler. I thus explained how to construct modern-day #BesslerWheels and why they worked, pp. 101-111.

I explained how one can produce an #ArtificialSun and how/why it should work, pp. 134-139.

I explained how we can have #LeveragingUsingRotatingCylinders to produce power, pp. 120-123, 150-152.

I calculated the average temperature surrounding this earth, including the sun-sized spot of 6000 deg K, and found it to be approximately the background temperature of space which is three deg K, pp. 23-24. I explained how this earth is not a frozen ice-ball because of nuclei rotating about horizontal axes, providing gentle radiation so that we don’t freeze because of the Bessler principle.

I demonstrated in my backyard on a clear cool night on 24/25 Jan 2022 how I could get six deg F of cooling by putting a plastic bowl of water at the focal “point” of a stainless steel bowl looking up at the night sky, with the metal bowl on top of a ladder. The water gave up more radiation to the sky or cold space beyond than it received, so it froze, pp. 24-25.

Many people are confused thinking that the greenhouse effect or #GreenhouseEffect keeps energy within this earth’s atmosphere, when in reality it is usually the #BesslerPrinciple, which produces much beneficial radiation that keeps us from freezing because of cold exposure to the background temperature of space, p. 82.

The #JupiterSaturnExcessRadiation (they emit more radiation than they receive from the sun) can be easily explained by the Bessler principle by many nuclei rotating about horizontal axes and acquiring greater rotational kinetic energy, pp. 54-56.

The enigma/puzzle of #ColdFusion can be explained as the interaction of rotating nuclei as initiated by the Bessler principle, MSEHNS pp. 56-60. Also see my technical note, “Some Thoughts on a Simple Mechanism for the 2H + 2H -> 4He Cold Fusion Reaction” Fusion Technology, American Nuclear Society, Vol. 24, No. 3, November 1993, pp. 319-323.

I explain how blocks for building pyramids in Egypt could have been rolled by completing cylinders for their being rolled. See Fig. 16 below. The archeological evidence is now in favor of their being rolled. I explained how that was likely. The Bessler principle helped in Egyptian pyramid building, pp. 114-124.

I explained or solved many other energy enigmas.

AEP – 19 June 2025

Meyer Fuel Cell

Continual Green-Energy Devices Provided in MSEHNS. I provided information on constructing such new 24-7 green-energy-devices (#Green_24_7) as the Meyer fuel cells, within my free 200-page pdf-book, Many Scientific Enigmas Have New Solutions or MSEHNS, which I published on 3 June 2025. I found new solutions to at least 89 different types of scientific enigmas. My book, #MSEHNS, is available from both https://gravityunveiled.home.blog/ and https://gravity-wheel.neocities.org/.


See Appendix A.3 “Partial Explanation for a Working Stanley Meyer Fuel Cell” on pp. 170-175 of MSEHNS, for ideas about how one might produce a Meyer fuel cell. Meyer used short pulses of increasing horizontal electric fields to exploit rotational resonances of the electrically polar water molecule, by the #BesslerPrinciple. Meyer didn’t use a steady horizontal electric field. There was a good reason why Meyer avoided such.


Avoid Water Clusters. A steady horizontal electric field would have caused large collections of nuclei within water to internally rotate with greater angular speed about nearly horizontal axes, by the Bessler principle into nearly horizontal magnetic dipoles. Nearly horizontal magnetic dipoles would align into nearly horizontal water chains. We don’t want the water to thus be transformed into chains of HOHHOH, HOHHOHHOH, etc. The chains would align with other chains to form surfaces. The surfaces would align with other surfaces to form volumes, which would be stagnant #WaterClusters. Those water clusters cannot be rotationally ripped apart.


Rotationally Rip Apart Water Molecules. The “normal” electrically polar water molecule, with initially approximately 104.5 degrees of separation between hydrogen atoms (relative to the oxygen atom), needs to only be locally and temporarily held in a horizontal orientation to allow the Bessler principle to rotationally rip apart the water molecule. See Fig. 22 on p. 172 of MSEHNS, which is the following not-to-scale figure.


The Meyer fuel cell created rotational resonances in water molecules using pulses of temporarily-increasing horizontal electric fields. The atoms in the water molecule depicted within Fig. 22 were not drawn to scale. The atoms in water were drawn larger and further apart so that they could be more easily seen. I also put that figure within the front cover of MSEHNS.
We may not need this Meyer fuel cell nowadays, since GEET reactors can break up water molecules into atoms. Still, I thought I should explain the mystery of how it was possible for Meyer’s fuel cell to physically work. In Meyer’s patents, he indicated that that he was using a resonance. Critics of the Meyer fuel cell, who didn’t understand the Bessler principle, were incapable of understanding how Meyer could exploit a rotational resonance brought on by the Bessler principle. The Bessler principle did the heavy lifting so that the energy to disassociate each water molecule was much less than that of electrostatically pulling it apart. Each short electric field pulse needed to be temporarily increasing within the pulse, as Meyer depicted in his patents, because it was necessary to keep holding each candidate molecule in a horizontal orientation, given larger separation angles, as the molecule was being rotationally ripped apart by the Bessler principle. As each molecule was being rotationally ripped apart, its nuclei would consist of magnetic dipoles oriented in parallel horizontal directions. External horizontal magnetic fields partly using external magnetic fields might be helpful but the Meyer patents didn’t show that he had much concern with outside magnetic fields.


Among many other things, currently we have these energy productive related things: #DoubleHelixVortexTubes, #GEET_reactors, #RailroadEfficiency, #RailroadWheels, #VortexTubeTemperatures, and #YildizMagneticMotors.


Among many other things, we can look forward to these energy productive related things: #ArtificialSun, #BesslerWheels, #LeveragingUsingRotatingCylinders, #MeyerFuelCells, #OrffyreanRollerBearings, #PappEngines, #Sweet16Cylinders, and #YinYangCylinders.


AEP – 14 June 2025